Excalibur Pinpoint Mod Parts List

Cut and paste from Master OBN Kenobi from FMDF:

Got a few asking me to share a list of what is needed. I did one a few years ago but can’t remember where so here is another.

https://www.allelectronics.com/item/...der-.10/1.html
White 2 pin connector

https://www.mouser.com/ProductDetail…e68gV4QQ%3D%3D
Heyco pigtail water tight fitting

Bike Bar ends…any bike shop will have these also…

https://www.amazon.com/Alloy-Chrome-…eation&sr=1-40

https://www.amazon.com/Diamondback-1…77927798&psc=1
Grip…same here any bike shop or walmart

this is the toggle I used for years, good if you like to hunt in both PP and disc…very dependable, just epoxy the 4 small rivits on top for best results, protect.

cable 2 lead

think this is the small allens that hold the endcap in

this is the black shrink wrap …can be cut to fit then used…4 feet take note

Epoxy

https://www.mouser.com/ProductDetail...rrencycode=USD
the yellow push button which I use only now

https://www.mouser.com/ProductDetail...rrencycode=USD
4 pin fitting if you want to make the handle removable…female

https://www.mouser.com/ProductDetail...rrencycode=USD
4 pin male fitting to mate to the above

VIDEO OF

https://www.youtube.com/watch?v=WrhG…ature=emb_logo

https://www.mouser.com/ProductDetail/TE-Connectivity-Alcoswitch/PB6B2HS5M2CAL00?qs=55YtniHzbhC8w%2BWu%2F9rvXg%3D%3D&countrycode=US&currencycode=USD


21g
21j
21n
21z

Headphone cord…can be purchased through Ebay